Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in San Antonio?
Panel replacement in San Antonio typically costs between $250 and $500 for a single garage door panel, including the panel itself and labor. Most homeowners in San Antonio neighborhoods like Alamo Heights, Stone Oak, and Helotes pay around $320 to $410 for a standard 16-foot-wide steel panel replacement done by a professional. Fernbrook Garage Doors San Antonio provides a written price before any work begins, so you’ll know the exact number before a technician touches your door.
If the damage is isolated to one or two panels and the rest of the door is structurally sound, replacement is almost always the right call over a full door install. You keep your existing tracks, springs, and opener, and the repair happens in a single visit. That said, there are situations where replacement costs climb, and we’ll get into those below with specific dollar figures so nothing surprises you.
For more detail on how we approach this repair in San Antonio specifically, see our Panel Replacement in San Antonio page. You can also return to our home page for a full look at what Fernbrook covers.
Panel Replacement Cost Breakdown (2026)
Here’s a line-by-line look at what panel replacement costs in the San Antonio market as of 2026. These ranges reflect what we see across Bexar County, from older homes in Jefferson and Monte Vista to newer builds in Cibolo and Schertz.
| Cost Item | Typical Range | Notes |
|---|---|---|
| Single steel panel (standard 16′ or 18′ door) | $120 – $240 | Gauge and finish affect price. White or almond is less than custom colors. |
| Single insulated steel panel | $180 – $320 | Polystyrene or polyurethane core. Common in San Antonio for heat and noise control. |
| Aluminum or glass panel | $200 – $400 | Full-view or frosted glass panels common in modern homes near the Pearl and Southtown. |
| Wood or wood-look panel | $220 – $450 | Custom grain and stain matching on carriage-style doors. |
| Labor (single panel, standard removal and install) | $100 – $160 | Includes old panel removal, new panel attachment, roller and hinge reassembly. |
| Two panels, same visit | $380 – $500 | Labor is shared across panels, so per-panel cost drops. |
| Panel plus roller replacement (same section) | Add $40 – $80 | If the impact bent rollers or hinges, replacement is done at the same time. |
What pushes the price toward the $500 end: large 18-foot double doors, insulated panels on a door that had none, custom colors that require factory matching, wood-grain finishes, or damage that also bent the horizontal track. What keeps it near $250: a standard white non-insulated panel on a common 16-foot door with no secondary damage.
In our experience across San Antonio, the most common job is a single panel on a double-wide door, replaced because a car, a trailer hitch, or a lawn mower caught the bottom section. That repair lands between $300 and $400 on most days.
What Affects Panel Replacement Pricing in San Antonio
- Panel material and insulation. San Antonio summers push many homeowners toward insulated panels. A basic non-insulated steel panel runs $120 to $180 for the part; an insulated one starts around $180 and can pass $300 for thicker cores. The sun exposure on west-facing garage doors in neighborhoods like Great Northwest and Alamo Ranch makes insulation a question worth asking before you commit.
- Door brand and model. We work on eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Some older Clopay and Wayne Dalton doors use proprietary hinge systems, which means the panel must match the exact model line. Generic panels don’t always fit, and that can add $30 to $60 to the part cost.
- Panel width and height. A single-car 8-foot or 9-foot door panel costs less than a 16-foot or 18-foot double-door panel. The difference is mostly material, but it also affects handling. Longer panels are more prone to flexing during installation, so techs take extra time to align them.
- Location of the damage. Bottom panels are the most commonly replaced because they catch impacts at bumper height. But a bottom panel replacement often means the weather seal and bottom bracket also need attention. That adds $20 to $40. Top panels, especially on older doors, can be trickier because the opener arm attaches there.
- Track and hinge condition. If the impact that damaged the panel also skewed the track or bent a hinge, realignment or replacement is needed before the new panel will roll cleanly. In San Antonio, where clay soil shifts can already put stress on tracks, we check alignment on every panel job. That’s why our written quote sometimes includes a track realignment line item.
- Finish matching. A 15-year-old door has faded paint. A brand-new panel won’t match it perfectly no matter what we do. For homeowners in historic districts like King William or Lavaca, where curb appeal matters, we’ll talk through whether a repaint of the affected section or the whole door is worth planning for after the panel goes in.
How the Panel Replacement Process Works
Here’s what happens when Fernbrook Garage Doors San Antonio replaces a damaged panel. The goal is to leave your garage looking like no one was there, except for the fixed door.
- You call and a live person answers. No voicemail tree, no call center that doesn’t know San Antonio. We answer 24/7 at (806) 602-8374.
- We schedule a visit and arrive in a marked Fernbrook vehicle. Our technicians are background-checked and in uniform. They’ll introduce themselves before entering your property.
- We inspect the door and write down a price. Before any tool comes out, you get a written quote for the exact job. That price covers the panel, hardware, labor, and clean-up. Nothing is hidden in a line item you haven’t seen.
- We protect the inside of your garage first. Shoe covers go on at the threshold. Drop cloths go down inside the garage. If your kids are napping or your dog is in a crate near the door, we ask before moving anything and we work quietly.
- We remove the damaged panel and install the replacement. This usually takes 60 to 90 minutes for a single panel. Hinges and rollers are reused unless they’re damaged, and we’ll tell you if we see anything that needs attention.
- We test the door through a full open-and-close cycle. We check balance, listen for grinding, and make sure the safety sensors, if you have an opener, are still aligned.
- We clean up and show you a photo. Before we leave, we take a photo of the cleaned-up work area, same as we do on every visit. You see exactly what was left behind.
- Your job is covered by the 365-Day Done Right Promise. If it’s not done right, we make it right. No fine print games, no argument.
Jesse Calder, who leads Fernbrook Garage Doors San Antonio, has built the whole operation around this sequence. Written price before work. Protection inside the home. A photo when the job’s done. That’s the standard on a $300 panel job or a full door replacement.
How to Save on Panel Replacement
Panel replacement is one of the more predictable garage door repairs when it comes to price, but there are a few ways to keep the number at the lower end of that $250 to $500 range.
Act before the damage spreads. A dented panel that still rolls can seem like a cosmetic problem, but bent metal puts uneven load on the hinges, rollers, and track. Within a few months, a $300 panel job can become a $500 panel-plus-track job. If the dent is new, call early.
Ask whether one panel or two is the smarter repair. On some doors, especially with side-by-side impacts, replacing one panel leaves a visible mismatch in finish and roll. Two panels done in the same visit cost less per panel because labor is shared. We’ll tell you straight if one will do, and we’ll also tell you if two is the better long-term call.
Don’t skip the estimate because you’re worried about pressure. Our estimate is free, and it comes as a written number you can keep even if you don’t book the job that day. Call (806) 602-8374 and you’ll have a real price to compare against anyone else in San Antonio.
Decide on insulation before we order the panel. If your door faces west in San Antonio, the garage gets cooked in the afternoon. An insulated replacement panel costs $60 to $140 more than a non-insulated one, but it reduces heat transfer into the garage, which matters if you have a bedroom above it or a workshop inside. Ordering insulation at replacement time costs less than redoing the panel later.
Keep the opener, rails, and springs unless they need work. Panel replacement doesn’t require touching any of those components, and we won’t suggest replacing anything that’s working. Our job is to fix what’s broken, not to build an invoice.
Panel Replacement vs. Full Door Replacement: A Cost Comparison
Sometimes a panel is the right fix; sometimes the math points toward a new door. Here’s how the numbers compare in San Antonio.
Panel replacement: $250 to $500, keeps your existing door, springs, tracks, and opener. Best when the damage is isolated and the door is under 15 years old. The repair takes under two hours in most cases.
Full door replacement: $700 to $2,200 depending on material, insulation, size, and style. A basic non-insulated steel double door starts around $700 to $900 installed. An insulated steel door with a better finish runs $1,200 to $1,800. A wood-look carriage door with windows can pass $2,000 in San Antonio.
The decision usually comes down to age. If your door is original to a 2005-era home in Stone Oak or Alamo Ranch, it’s likely nearing the end of its spring and roller life too. Spending $400 on a panel for a door that may need $500 more in spring and roller work over the next two years isn’t always the best use of that money. If the door is newer or you recently replaced the springs, panel replacement is the lower-cost path and we’ll say so.
Our technicians are trained on doors from all eight major brands we service, and they’ll give you an honest read on whether the panel fix will hold or whether the whole door is entering its replacement window. Either way, the written estimate covers your options in plain numbers.
Frequently Asked Questions About Panel Replacement Cost in San Antonio
How much does it cost to replace one garage door panel in San Antonio?
A single garage door panel replacement in San Antonio typically costs $250 to $500, with most jobs landing between $300 and $400 for a standard steel panel on a double door. The panel itself ranges from $120 to $320 depending on material and insulation, and labor adds $100 to $160. For an exact price on your specific door, call (806) 602-8374 and we’ll give you a written number during the same visit.
Is it cheaper to replace a panel or install a new garage door?
Panel replacement at $250 to $500 is cheaper than a new door, which runs $700 to $2,200 in San Antonio. The break-even decision usually depends on the door’s age and condition. If the door is under 12 years old and the rest of the hardware is sound, a panel is the clear value. If the door is older and springs or rollers are near the end of their life, a new door may cost less over the next three years. We’ll give you both numbers before you decide.
Can you replace just one panel, or do I need to replace the whole door?
In most cases, just one panel can be replaced. Panels are individually attached through hinges, so a single damaged section comes out and a new one goes in without disturbing the rest of the door. Exceptions are rare and usually involve doors manufactured with proprietary or discontinued panel profiles. If your door’s panel is no longer made, we’ll tell you truthfully and show you your options.
How long does panel replacement take?
For a single panel, expect 60 to 90 minutes from the time our technician starts to the time the door is tested and the work area is cleaned. Double-panel jobs take up to two hours. That time includes laying down drop cloths, protecting your floors with shoe covers, and the clean-up photo before we leave.
Do you charge for estimates on panel replacement in San Antonio?
No. Estimates are free, and the price we quote is written down before any work begins. You can keep that written quote whether you book or not. Call (806) 602-8374 any time, day or night, and a live person will schedule the visit.
Can you replace a panel the same day I call?
In many cases, yes. Common steel panels for 16-foot doors are often in stock at our San Antonio supply partners, and we prioritize same-day panel replacement when the damage leaves your garage exposed or unusable. Call (806) 602-8374 and we’ll tell you over the phone whether your panel is one we can get same day.
Will the new panel match my existing garage door?
We match the panel by brand, model, and finish as closely as the market allows. A new panel on a door that has faded over years in the Texas sun won’t be a perfect color match, and we’ll tell you that before you spend a dollar. If a close visual match matters, we can discuss repainting the door after the panel goes in. That’s a conversation we have regularly in San Antonio, especially on west-facing doors in neighborhoods like Great Northwest and Alamo Ranch.
Do you work on all garage door brands for panel replacement?
Our technicians are trained on eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. If your door is from one of those brands, we can source the correct panel. If it’s a less common or discontinued brand, we’ll work to find a match and give you honest options if the exact panel isn’t available.
What happens if something goes wrong after the panel is replaced?
Every job is covered by the 365-Day Done Right Promise. If the panel, the hinges, the alignment, or anything else related to the job isn’t right within a year, we return and make it right at no charge. That’s a Fernbrook standard, not an add-on you pay for.
Is panel replacement covered by homeowners insurance in San Antonio?
Sometimes. If the damage came from a vehicle impact, a fallen branch, or a storm event common in San Antonio’s spring and early summer, your homeowners policy may cover panel replacement after your deductible. We provide documented written estimates that many insurers accept for claims. We don’t handle the claim for you, but we’ll give you the paperwork your adjuster needs.
Why San Antonio Homeowners Call Fernbrook for Panel Replacement
The actual panel repair is straightforward for a trained technician. What separates one company from another is what happens around the repair: how the home is treated before the work, how the price is communicated, and what the garage looks like when the truck pulls away.
Fernbrook Garage Doors San Antonio is an independently owned and operated member of the Cedarwell family of businesses, founded in 2002. Every visit follows the Cedarwell Care Promise, which means a few concrete things happen on every panel replacement job:
- A written price is delivered before any work begins. You read it, you sign it, and that’s the number on the invoice. No exceptions.
- Shoe covers on hardwood and tile. Technicians put them on before stepping inside the garage or the home. Your floors stay clean.
- Drop cloths go down before the work area is touched. Metal shavings, old grease, and dirt stay on the cloth, not on your floor.
- We ask before moving or touching anything. Dog crates, strollers, bikes, tools. Nothing gets shifted without your okay.
- The clean-up is photographed before we leave. You see exactly what the work area looked like when we finished.
That C.A.R.E. standard – Clean up like it is our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, Explain the price before the work – is what Jesse Calder and the whole Fernbrook team operate by. It’s not a marketing phrase. It’s a checklist every technician follows, on a $250 panel job or a $2,200 door install.
And when it’s not done right, the 365-Day Done Right Promise means we come back and make it right. That promise is stamped on every job, no negotiation required.
Get a Written Price for Panel Replacement in San Antonio
If you have a dented, cracked, or bent panel on your garage door in San Antonio, the fastest way to know where you stand is to call. A live person answers at (806) 602-8374, any hour, any day. We’ll schedule a visit, assess the panel, and hand you a written price before any work starts. If you decide the timing isn’t right, the estimate is yours to keep.
We serve all of San Antonio and surrounding Bexar County communities, from Alamo Heights and Terrell Hills to Stone Oak, Helotes, Cibolo, Schertz, Alamo Ranch, and beyond. Whether your garage faces the afternoon sun in Great Northwest or sits under oak trees in Olmos Park, we’ll treat your home like we’d treat our own.
Call (806) 602-8374 for a free panel replacement estimate in San Antonio.
Pricing reflects the San Antonio market as of 2026. Fernbrook Garage Doors San Antonio offers free estimates – call (806) 602-8374.
Written by Jesse Calder, Owner at Fernbrook Garage Doors San Antonio, serving San Antonio families since 2002.
What Our Customers Say
"Quiet, careful, done right. The door used to wake the whole house when it opened early. Now you barely hear it. He cleaned up every bit of the old hardware."
- Ty Robinson"The work was careful and clean. There was a short wait for a part on an older opener, so it took two visits. Both techs were polite and respectful of the house. Working great now."
- Gina Marchetti"Replaced a dented panel and serviced the opener. What stood out was how clean they left everything, cleaner than before honestly. Swept the whole garage bay."
- Amanda Shu