Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateFast, Reliable Garage Door Installation Across Windcrest
A new garage door in Windcrest runs $700 to $2,200 installed, and most jobs we schedule within the week. We work on the ranch-style homes and detached workshops this part of Bexar County is known for, and we carry the heavier hardware those older openings need. If you’re off Midcrown Drive, up toward the golf course, or on one of the quiet streets south of Crestway, we know the drive and we’ll be on time. Call (806) 602-8374 for a free estimate with a written price before any work starts. Jesse Calder leads our team, and every installation comes with the 365-Day Done Right Promise.
Why Fernbrook Garage Doors San Antonio Is Windcrest’s Preferred Garage Door Installation Company
Windcrest homeowners call us for one reason that comes up again and again: we treat the inside of the home the way we’d treat our own. That means shoe covers on hardwood before we step in, drop cloths on tile, quiet tools when the kids are asleep, and pet-safe products where there’s a choice. Our technicians ask before moving anything, including a dog crate or a stroller parked near the garage entry. The job is done properly, and the house looks like we were never there except for the new door.
We’re part of the Cedarwell family of businesses, founded in 2002 and independently operated. Every Fernbrook location follows the same Cedarwell Care Promise: a written price before work begins, shoe covers and drop cloths inside the home, and a photo of the clean-up before the technician leaves. Windcrest customers get the same standard on every visit with no exceptions. A live person answers the phone 24 hours a day, 7 days a week. No voicemail trees, no next-day callbacks.
Our technicians are trained on eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That training matters in Windcrest because we see a mix of original 1960s hardware and newer replacement doors. We stock parts for both.
Styles & brands we work with
Garage Door Installation Contractors in Windcrest
Garage Door Installation Contractors in Windcrest handle everything from swapping a warped wooden tilt-up for a modern sectional steel door to installing a new opener sized for a detached workshop. A full new door installation in this area typically runs $700 to $2,200, depending on door width, insulation, and whether the opening needs new jambs. We quote that price in writing before any work begins, and that price doesn’t change once we’re on site unless you ask us to add work.
Sectional Conversions for Mid-Century Openings
Many Windcrest homes still have the original single-panel doors from the 1960s. Those openings are usually standard width, but the old extension-spring hardware needs full conversion to torsion before a sectional door goes in. We do the spring-cycle audit and conversion as part of the installation. It is not an add-on. It is the correct way to hang a new door on an old opening.
Oversized Workshop Door Installations
Windcrest has enough acreage that detached workshops and oversized garage doors are common. A 12-foot or 18-foot door weighs more and cycles more often than a standard residential door. That requires heavier torsion springs, a stronger opener, and end bearing plates that won’t flex. We size the hardware for the actual door weight and expected cycles, not the cheapest fit.
Garage Door Seal Installation in Windcrest
Garage Door Seal Installation in Windcrest is a job we recommend alongside nearly every new door installation, and it’s one homeowners don’t think about until the first big storm. Windcrest gets heavy spring rains and the occasional hail storm. A bottom seal that’s cracked or compressed lets water, dirt, and leaves into the garage. Replacing it runs $120 to $240, and we inspect the seal channel while we’re working because rust from hail-damaged channels seizes the bottom rollers over time.
Bottom Seal Replacement
The bottom seal takes the most abuse on any Windcrest garage. Heat and humidity dry out the rubber, and hail dents the aluminum channel that holds it. If the channel is bent or rusted, we replace it rather than fitting a new seal into a failing track. That keeps the new door balanced and quiet.
Weatherstripping Around the Opening
The side and top weatherstripping on older Windcrest homes is often original to the 1970s. Brittle, cracked strips let dust and the Texas heat into the garage. We replace them as part of the installation and show you the difference in the gap before we clean up.
Trusted Brands We Service in Windcrest
We install and service doors from Amarr, Wayne Dalton, and Raynor, among the eight brands our technicians train on. For Windcrest customers, that means we can match an existing door’s hardware if you’re only replacing one panel or the opener. We keep common parts stocked for the brands you’ll find in this area with local pickup and quick turnaround. If a part needs to be ordered, we tell you up front and schedule the return trip before we leave.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Installation Problems We See in Windcrest Homes
- Rotted wooden jambs from decades of humidity. The original door frames on many Windcrest ranch homes have absorbed forty or fifty years of Gulf moisture. If we bolt new track to a rotted jamb, the alignment shifts within months. We rebuild the jamb first or tell you honestly that it needs attention before a new door goes in.
- Undersized openers on oversized workshop doors. A homeowner orders a standard opener for an 18×8 door. The rail flexes under the extra weight and the motor burns out early. We size openers for the door and the cycle count, not the sticker price.
- Extension-spring hardware still on original doors. The 1960s tilt-up doors near the Windcrest Golf Course often still run on extension springs. When those springs snap, the door can drop hard. We convert to torsion springs on every install where the old hardware is present.
- Rust from hail-damaged seal channels. Hail dents the aluminum channel, water sits in it, rust forms, and the bottom rollers bind. Skipping a seal replacement during installation leaves the new door noisy and out of balance. We address it while the old door is off.
Pricing for Garage Door Installation in Windcrest, TX
| Service | Price Range |
|---|---|
| New Door Installation | $700 – $2,200 |
| Opener Installation | $250 – $550 |
| Panel Replacement | $250 – $500 |
| Cable Repair | $130 – $250 |
| Spring Repair | $180 – $340 |
The range depends on door size, insulation level, and what’s going on with the existing opening. A standard single-car sectional on a clean opening sits near the lower end. An insulated double door with new jambs and an opener sits near the top. Every quote is written and agreed before work starts, so there is no surprise invoice at the end. Call (806) 602-8374 for a free estimate. We’ll walk the opening with you and explain exactly where the money goes.
We Also Serve Cities Near Windcrest
Windcrest is our focus on this page, but our crews regularly serve Garage Door Installation in Windcrest and the surrounding area, including San Antonio, New Braunfels, Fair Oaks Ranch, and Live Oak. If you’re just outside city limits, call anyway. We likely cover your street, and the same written-price promise applies.
Serving Windcrest, TX - Our Local Coverage Area
We’re based in the Windcrest area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Garage Door Installation in Windcrest
In most cases, yes. The rough opening on a Windcrest ranch home is usually a standard width, so a sectional door tracks can be mounted without reframing. The work is in converting the old extension-spring hardware to torsion springs, which we do as part of the installation. Some openings have rotted jambs that need rebuilding first. We tell you exactly what’s required when we measure, and the written quote reflects it.
It’s necessary. A 12-foot-wide door weighs significantly more than a standard 9-foot door, and workshop doors cycle more often than a garage attached to the house. A standard residential spring rated for 10,000 cycles may fail in a couple of years on a workshop that opens several times a day. We install high-cycle torsion springs sized for the actual door weight, and we show you the spring rating before we install it. Call (806) 602-8374 for an exact quote.
An insulated steel door in Windcrest typically runs $1,200 to $2,200 installed, depending on the size and the condition of the existing opening. That includes removal of the old door, torsion-spring conversion where needed, new weatherstripping, and a cleanup photo before we leave. The written quote you sign is the price you pay. Call us for a free measure and we’ll give you an exact number for your opening.
You can replace just the door panel or the whole door depending on what’s warped. If the warping is confined to the door itself and the track, springs, and opener are in good shape, we can swap the door and leave the rest. If the warping has pulled the track out of alignment or the springs are original from the 1960s, the whole system needs attention. We show you what we find before we touch anything.
The most common cause we find in Windcrest is a photo-eye sensor that’s misaligned or dirty, especially after a thunderstorm blows dust and debris into the garage. The second most common cause is an opener that’s undersized for the door weight, which we see on oversized workshop doors. We check both when we respond, and the fix is usually quick. Call (806) 602-8374 and a live person answers, day or night.
Written by Jesse Calder, Owner at Fernbrook Garage Doors San Antonio, serving Windcrest and the surrounding area.