Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in San Antonio?
Spring replacement in San Antonio typically costs between $180 and $340 for a standard torsion spring on a single-car garage door, including the spring, labor, and a safety inspection of the surrounding hardware. Most jobs are completed the same day, often within an hour or two of the technician arriving. The final price depends on spring type, door weight, and whether you need one spring or a matched pair replaced.
At Fernbrook Garage Doors San Antonio, we hand you a written price before any work begins, so the number you see on the quote is the number you pay. No adjustments after the fact, no surprise line items. If the spring breaks on a Saturday morning, a live person answers our phone and walks you through what to expect, down to the dollar.
Spring Replacement Cost Breakdown (2026)
Spring replacement pricing in San Antonio has held steady through 2025 and into 2026. Here’s what you can expect to see on an invoice, line by line. These ranges reflect what we’re seeing across the city, from Alamo Heights to Stone Oak to Helotes.
| Line Item | Typical Cost Range | What It Covers |
|---|---|---|
| Torsion spring (single) | $90 – $180 | The spring itself, rated for your door’s weight and cycle count |
| Labor & installation | $90 – $160 | Removal, installation, balancing, and a full hardware check |
| Matched pair replacement (two springs) | $250 – $340 | Both springs replaced to keep tension even across the door |
| Extension spring replacement | $180 – $280 | Older doors with side-mounted springs; includes safety cable replacement |
| High-cycle spring upgrade (25,000+ cycles) | $280 – $340 | Longer-life spring, ideal for daily-use doors in hot climates |
The most common scenario we see in San Antonio: a two-car garage door with two torsion springs where one has snapped. We recommend replacing both springs at the same time. They wear at roughly the same rate, and if one has failed, the other is usually close behind. A matched pair replacement for a typical two-car door lands in the $250 – $340 range.
Why Does Spring Replacement Cost What It Does?
A garage door spring carries the full weight of the door every time it opens and closes. The spring is wound to precise tension during installation, and that winding process is the part that demands a trained technician. The $90 – $160 labor range reflects more than an hour of careful work: removing the old spring, measuring the door, setting the new spring to the correct torsion, testing the balance, and lubricating the rollers and hinges. You’re paying for the skill that keeps the door from crashing down.
San Antonio’s climate also plays a role. Our summers push garage temperatures past 110°F in attached garages, and that heat accelerates metal fatigue. A spring rated for 10,000 cycles in a cooler climate may fall short of that mark here. We regularly recommend high-cycle springs for San Antonio doors that see four or more open-and-close cycles a day.
What Affects Spring Replacement Pricing in San Antonio
- Door weight and size – A 16-foot two-car door needs heavier springs than a 7-foot single-car door. Heavier springs cost more and take more labor to wind. Expect the upper end of the range for oversized or solid-wood doors.
- Spring type – Torsion springs (mounted above the door opening) are the standard on homes built after about 1995. Extension springs (stretched along the side tracks) are cheaper but less safe, and they usually cost slightly less to replace. Some older San Antonio homes in neighborhoods like Jefferson and Beacon Hill still have extension systems.
- One spring or two – Two-car doors have two springs. Replacing both at once is cheaper per spring than doing them separately. You’ll pay $250 – $340 for the pair, compared to $180 – $230 for a single spring replacement if the other is still in good condition.
- Cycle rating of the spring – Standard springs are rated for about 10,000 cycles. High-cycle springs (rated for 25,000 to 50,000 cycles) cost more upfront but last significantly longer in a San Antonio household where the door opens five or six times a day.
- Garage ceiling height and configuration – Some San Antonio garages, particularly in newer subdivisions around Cibolo and Schertz, have high-lift door setups that require longer cables and more complex spring arrangements. These jobs take more time and push the total toward the higher end.
- Age of the door and related wear – If the door itself is 20 years old and the bearings are worn, the spring replacement may need supporting work like roller replacement or track realignment. That’s reflected in a combined quote, which we always show as a written estimate before starting.
How to Save on Spring Replacement
Spring replacement isn’t a service you want to shop purely on price. A spring installed with the wrong tension can throw the door out of balance, burn out your opener, or cause the door to slam shut. That said, there are honest ways to keep the cost down without cutting corners.
- Replace springs in pairs when recommended – It sounds like spending more, but it is cheaper over a two-year window. If one spring fails and the other is the same age, you’ll likely pay for a second service visit within a year. One visit, one labor charge, two springs.
- Ask about the cycle rating before you agree – A standard spring and a high-cycle spring can look identical on the shelf, but the high-cycle version lasts longer in a hot garage. If your door gets daily use, the upgrade pays for itself by delaying the next replacement.
- Book at the first sign of trouble – A door that creaks, opens unevenly, or feels heavy when you lift it manually is telling you something. Catching spring wear before the spring snaps can prevent damage to cables, rollers, and the door panel itself, which would add $110 to $500 to the bill.
- Use a company that gives you the price before work begins – Fernbrook Garage Doors San Antonio provides a written quote on every visit before a single tool comes out. Call (806) 602-8374 and we’ll walk you through the expected cost over the phone, no obligation. Estimates are free.
A note on comparison shopping in San Antonio: some companies quote a low spring price and then add charges for cables, brackets, or a “safety inspection” after the work is underway. Ask for a line-item breakdown before you say yes. If the company won’t put it in writing, that’s your answer.
What’s Include With Spring Replacement at Fernbrook
When we replace a spring in a San Antonio home, the spring itself is just one part of the visit. Here is what happens, step by step, so you know exactly what to expect.
- Phone diagnosis and price range – You call, a live person answers, and you describe what happened. We give you a price range over the phone so you’re not blindsided.
- Shoe covers on, drop cloths down – Before we walk into the garage, our technician puts on shoe covers and lays drop cloths over any tile or finished flooring in the path of the work.
- Written quote – We inspect the door, measure the spring, and hand you a written price for the full job. That’s the price you pay. If we find something else during the repair that needs attention, we ask before touching it and update the written quote.
- Spring replacement and balancing – The old spring is removed, the new spring installed and wound to the correct torsion, and the door tested through a full open-close cycle.
- Hardware check and lubrication – We check the rollers, hinges, cables, and opener while we’re there. Pet-safe lubricant on the moving parts, quiet enough that it won’t wake a sleeping toddler in the next room.
- Clean-up photo – Before the technician leaves, they take a photo of the cleaned work area and show it to you. That’s the Cedarwell Care Promise, and it’s part of every visit, not an upgrade.
Every spring replacement is backed by the 365-Day Done Right Promise. If something isn’t right with the spring or the install within a year, we make it right. No forms, no negotiation, no “prove it was our fault.”
Is It Cheaper to Repair or Replace a Spring?
A spring itself is not repairable. When a torsion spring snaps, the metal has failed, and no welding or patching will restore its strength or safety. The question that actually matters is whether you replace just the spring or use the moment to address the whole door system. Here’s the honest breakdown for San Antonio homeowners.
- Spring-only replacement: $180 – $340 – The door opens and closes like it should, and the rest of the hardware is in decent shape. This is the right call for most doors under 10 years old.
- Spring plus rollers and cables: $290 – $560 – If the door is older or the rollers are worn flat, replacing them at the same time prevents a second labor charge later. Roller replacement alone runs $110 – $220, and doing it during the spring visit saves the separate trip charge.
- Full door replacement: $700 – $2,200 – If the door itself is dented, rusting, or 25+ years old, a new door with a new spring system may be the better long-term move. New door installation in San Antonio runs $700 – $2,200 depending on size, material, and insulation.
We won’t push you toward a new door if the old one still has years left in it. Jesse Calder, who leads Fernbrook Garage Doors San Antonio, has a simple rule: if we would repair it on our own garage, we’ll tell you to repair it. If we’d replace it on our own garage, we’ll tell you that too, and show you the numbers for both options.
For a deeper look at the full service, visit our Spring Replacement in San Antonio page.
Why San Antonio Springs Break in the First Place
Every garage door spring has a cycle rating. One cycle is one full open-and-close. A standard spring is rated for about 10,000 cycles. That sounds like a lot, but here is the math for a typical San Antonio family: if you open the door four times a day (leave for work, come home, take the kids to practice, come back), that’s roughly 1,460 cycles per year. A 10,000-cycle spring lasts about six and a half years.
Our heat accelerates the timeline. Metal fatigues faster in prolonged heat, and San Antonio garages routinely sit above 100°F from June through September. A spring that would last eight years in Minneapolis lasts six here. That’s not a scare tactic, it’s just the reality of the climate, and it’s why we recommend high-cycle springs for any San Antonio door that gets daily use.
How Do You Know a Spring Is Failing?
- A bang from the garage – When a torsion spring snaps, it sounds like a firecracker or a dropped toolbox. If you hear that, the spring has already failed, and the door won’t open properly.
- The door feels heavy – With the opener disconnected, try lifting the door by hand. It should lift smoothly with moderate effort. If it feels like dead weight, the spring has lost tension.
- The door opens crooked or only halfway – One broken spring on a two-spring door means the opener is doing all the work on one side. That strains the opener motor and can warp the track.
- Visible gap in the spring – Look up at the torsion spring above the door. If you see a gap in the coil, the spring has snapped.
If you notice any of these signs, stop using the door and call a technician. A door with a broken spring can fall with enough force to damage a car, injure a person, or tear the cables and brackets.
Safety Note: Do Not Attempt a DIY Spring Replacement
Torsion springs are under enormous tension, even when the door is closed. The winding and unwinding process is the single most dangerous task in residential garage door work, and it requires special winding bars and precise technique. A spring that releases unexpectedly can throw the winding bar across the garage with enough force to cause serious injury. This is not a weekend project. Please do not attempt it. Call a licensed technician who does this work every day.
How Fernbrook Handles Spring Replacement in San Antonio
We were founded in 2002, and we are part of the Cedarwell family of independently owned and operated garage door businesses. Every Fernbrook location operates under the same standards, and for us, those standards are a checklist, not a slogan.
Here is what that checklist looks like when you call us about a broken spring:
- A live person answers – 24 hours a day, 7 days a week. No voicemail tree, no “press 2 for service.” You call (806) 602-8374, a human picks up.
- A written price before any work – Our technician arrives, inspects the door, and hands you a written quote. The price on that paper is the price on the final invoice. Every time.
- Background-checked, uniformed technicians – The person who walks into your garage is an employee we’ve vetted, not a subcontractor we’ve never met.
- Shoe covers and drop cloths – On every visit, no matter the job. We know the garage might be the cleanest room in your house, or the place the kids ride scooters on a rainy day. We treat the floor like it’s ours.
- Quiet tools and pet-safe lubricant – We use lubricants that are safe around pets and kids, and we keep the noise down. If the baby is napping, tell us. We’ll work around it.
- The C.A.R.E. values on every job – Clean up like it is our own home. Ask before we move or touch anything. Respect the family’s time and quiet hours. Explain the price before the work. We don’t abbreviate these. They’re the actual list our technicians carry.
- A photo of the clean-up before we leave – We photograph the work area when we’re done and show it to you. That’s the Cedarwell Care Promise in practice.
Home to a San Antonio family means a garage door that opens without drama, and a technician who treats the house like it matters. That’s what we do.
Spring Replacement vs. Other Garage Door Repairs: Know the Difference
When a garage door stops working, the spring is the most common culprit, but it’s not the only possibility. Here’s a quick reference for what different problems cost in San Antonio, so you can tell a spring issue from a cable, opener, or track problem before you call.
| Repair Type | Typical Cost Range | What You’ll Notice |
|---|---|---|
| Spring replacement | $180 – $340 | Door won’t lift, heavy to lift manually, audible snap |
| Cable replacement | $130 – $250 | Frayed or dangling cable, door hangs unevenly |
| Opener repair | $120 – $320 | Motor hums but door doesn’t move, remote fails |
| Opener installation | $250 – $550 | New opener with rails, safety sensors, and programming |
| Track realignment | $120 – $240 | Door binds or squeals when opening, visible track gap |
| Roller replacement | $110 – $220 | Noisy operation, rollers visibly worn or cracking |
| Panel replacement | $250 – $500 | Dented or damaged section, usually from a vehicle impact |
A technician can tell you within minutes which one of these you’re dealing with. That diagnosis is free when we come out, and we’ll show you the worn part before we touch anything.
FAQs – Spring Replacement Cost
How much does it cost to replace a garage door spring in San Antonio?
Expect to pay between $180 and $340 in San Antonio for a standard torsion spring replacement, including labor. Two-spring systems on double doors typically land in the $250 – $340 range. Call (806) 602-8374 for a free phone estimate with a specific price for your door.
Can you replace a garage door spring the same day?
Yes, and in most cases, that’s exactly what we do. We keep common spring sizes stocked in our San Antonio service vehicles, so call us in the morning and your door is usually working again before dinner. If your spring size is uncommon, we’ll have the part within one to two business days and we’ll give you an exact timeline before any work is scheduled.
Is it worth replacing both springs at once?
In most San Antonio garages, yes. The springs on a double door wear at roughly the same rate. If one has snapped, the other is typically within months of doing the same. Replacing both at once costs $250 – $340, compared to $180 – $230 for a single spring and a likely second service call within a year. You save on the labor charge by doing both in one visit.
How long does a garage door spring last in San Antonio heat?
A standard spring rated for 10,000 cycles lasts roughly five to seven years in San Antonio, depending on how often the door is used. Homes where the door opens four or more times a day tend toward the shorter end. Our high-cycle springs, rated for 25,000+ cycles, typically last 10 to 15 years in the same conditions. For a family in Stone Oak or Alamo Ranch with kids and daily activity, that’s usually the smarter buy. Call us at (806) 602-8374 and we’ll help you do the math for your door.
What does Fernbrook charge for a free estimate?
Nothing. The estimate is free, it’s written, and it’s yours to keep whether you hire us or not. When we arrive for spring replacement, the written quote includes every line item, and that number is the final number on the invoice. There is no trip charge for service calls in the San Antonio area.
Does Fernbrook guarantee the spring replacement?
Yes. Every spring replacement is covered by the 365-Day Done Right Promise. If anything about the spring or the installation isn’t right within a year, we come back and make it right. No negotiation, no fine print.
Call Fernbrook Garage Doors San Antonio for a Free Spring Replacement Quote
If your garage door spring has snapped, or if the door is starting to feel heavy and uneven, call us before it gets worse. A live person answers the phone, day or night. We’ll give you a realistic price range over the phone, then come out and put the exact number in writing before any work starts.
You’ll get a technician in uniform, shoe covers on the floor, a written price in your hand, and a photo of the clean-up before we leave. That’s the job. The spring is the point; the way we treat your home is the part we’ve been doing since 2002.
Call (806) 602-8374 now for a free, no-obligation estimate on spring replacement anywhere in the San Antonio area.
Pricing reflects the San Antonio market as of 2026. Fernbrook Garage Doors San Antonio offers free estimates – call (806) 602-8374.
Written by Jesse Calder, Owner at Fernbrook Garage Doors San Antonio, serving San Antonio since 2002.
What Our Customers Say
"Our opener died and I have a baby who naps midday. The tech worked quietly and even asked if the timing worked around nap time. Fixed fast, and he swept up the little bits off the garage floor after."
- Melissa Arden"Quiet, careful, done right. The door used to wake the whole house when it opened early. Now you barely hear it. He cleaned up every bit of the old hardware."
- Ty Robinson"The work was careful and clean. There was a short wait for a part on an older opener, so it took two visits. Both techs were polite and respectful of the house. Working great now."
- Gina Marchetti